pcb/dyna-micro/dyna-micro.kicad_pcb

@@ -1,2 +1,93 @@
-(kicad_pcb (version 20241229) (generator "pcbnew") (generator_version "9.0")
+(kicad_pcb
+	(version 20241229)
+	(generator "pcbnew")
+	(generator_version "9.0")
+	(general
+		(thickness 1.6)
+		(legacy_teardrops no)
+	)
+	(paper "A4")
+	(layers
+		(0 "F.Cu" signal)
+		(2 "B.Cu" signal)
+		(9 "F.Adhes" user "F.Adhesive")
+		(11 "B.Adhes" user "B.Adhesive")
+		(13 "F.Paste" user)
+		(15 "B.Paste" user)
+		(5 "F.SilkS" user "F.Silkscreen")
+		(7 "B.SilkS" user "B.Silkscreen")
+		(1 "F.Mask" user)
+		(3 "B.Mask" user)
+		(17 "Dwgs.User" user "User.Drawings")
+		(19 "Cmts.User" user "User.Comments")
+		(21 "Eco1.User" user "User.Eco1")
+		(23 "Eco2.User" user "User.Eco2")
+		(25 "Edge.Cuts" user)
+		(27 "Margin" user)
+		(31 "F.CrtYd" user "F.Courtyard")
+		(29 "B.CrtYd" user "B.Courtyard")
+		(35 "F.Fab" user)
+		(33 "B.Fab" user)
+		(39 "User.1" user)
+		(41 "User.2" user)
+		(43 "User.3" user)
+		(45 "User.4" user)
+	)
+	(setup
+		(pad_to_mask_clearance 0)
+		(allow_soldermask_bridges_in_footprints no)
+		(tenting front back)
+		(pcbplotparams
+			(layerselection 0x00000000_00000000_55555555_5755f5ff)
+			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
+			(disableapertmacros no)
+			(usegerberextensions no)
+			(usegerberattributes yes)
+			(usegerberadvancedattributes yes)
+			(creategerberjobfile yes)
+			(dashed_line_dash_ratio 12.000000)
+			(dashed_line_gap_ratio 3.000000)
+			(svgprecision 4)
+			(plotframeref no)
+			(mode 1)
+			(useauxorigin no)
+			(hpglpennumber 1)
+			(hpglpenspeed 20)
+			(hpglpendiameter 15.000000)
+			(pdf_front_fp_property_popups yes)
+			(pdf_back_fp_property_popups yes)
+			(pdf_metadata yes)
+			(pdf_single_document no)
+			(dxfpolygonmode yes)
+			(dxfimperialunits yes)
+			(dxfusepcbnewfont yes)
+			(psnegative no)
+			(psa4output no)
+			(plot_black_and_white yes)
+			(sketchpadsonfab no)
+			(plotpadnumbers no)
+			(hidednponfab no)
+			(sketchdnponfab yes)
+			(crossoutdnponfab yes)
+			(subtractmaskfromsilk no)
+			(outputformat 1)
+			(mirror no)
+			(drillshape 1)
+			(scaleselection 1)
+			(outputdirectory "")
+		)
+	)
+	(net 0 "")
+	(gr_circle
+		(center 150.368 112.776)
+		(end 159.368 112.776)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(fill no)
+		(layer "Edge.Cuts")
+		(uuid "4c60a53c-8bb0-4bfe-bda9-3a35439b4610")
+	)
+	(embedded_fonts no)
 )

pcb/dyna-micro/dyna-micro.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 0,
+    "active_layer": 25,
     "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
@@ -62,9 +62,42 @@
     "version": 5
   },
   "net_inspector_panel": {
-    "col_hidden": [],
+    "col_hidden": [
-    "col_order": [],
+      false,
-    "col_widths": [],
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false
+    ],
+    "col_order": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      6,
+      7,
+      8,
+      9
+    ],
+    "col_widths": [
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0
+    ],
     "custom_group_rules": [],
     "expanded_rows": [],
     "filter_by_net_name": true,
@@ -75,7 +108,7 @@
     "show_unconnected_nets": false,
     "show_zero_pad_nets": false,
     "sort_ascending": true,
-    "sorting_column": -1
+    "sorting_column": 0
   },
   "open_jobsets": [],
   "project": {

pcb/dyna-micro/dyna-micro.kicad_pro

@@ -2,12 +2,213 @@
   "board": {
     "3dviewports": [],
     "design_settings": {
-      "defaults": {},
+      "defaults": {
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.05,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": true,
+          "text_position": 0,
+          "units_format": 0
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.8,
+          "height": 1.27,
+          "width": 2.54
+        },
+        "silk_line_width": 0.1,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.1,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
       "diff_pair_dimensions": [],
       "drc_exclusions": [],
-      "rules": {},
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "creepage": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_to_hole": "warning",
+        "holes_co_located": "warning",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "mirrored_text_on_front_layer": "warning",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "nonmirrored_text_on_back_layer": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_on_edge_cuts": "error",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_angle": "error",
+        "track_dangling": "warning",
+        "track_segment_length": "error",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.5,
+        "min_groove_width": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.0,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.5,
+        "solder_mask_to_copper_clearance": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpthpad": true,
+          "td_onroundshapesonly": false,
+          "td_onsmdpad": true,
+          "td_ontrackend": false,
+          "td_onvia": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
       "track_widths": [],
-      "via_dimensions": []
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [],
+      "zones_allow_external_fillets": false
     },
     "ipc2581": {
       "dist": "",

pcb/dyna-micro/fp-info-cache

@@ -0,0 +1 @@
+0